Power Grab Bond

NewGen Depot Power Grab Bond – Heavy-Duty Adhesive for Wall Panels

Specially formulated for PVC marble and composite wall panels, Power Grab Bond delivers a professional-grade, long-lasting hold — whether you're a seasoned contractor or a first-time DIYer. Engineered for high-moisture environments like bathrooms, kitchens, and shower walls, this adhesive sets quickly and bonds permanently to keep your panels secure for years.

Specifications

• Net Weight: 10 oz (283g) per tube
• Coverage: Approximately 30–40 linear feet per tube
• Setting Time: Initial grab in 5–10 minutes; full cure in 24 hours
• Bond Strength: >400 PSI (pounds per square inch)
• Application Temperature: 40°F – 100°F (4°C – 38°C)
• Solvent-Free: Low-VOC, safe for interior use
• Shelf Life: 12 months (unopened, stored below 80°F)
• Compatible Materials: PVC, WPC, MDF, Gypsum Board, Concrete, Drywall, Plywood, Ceramic

Key Features

• 🔒 Superior Bond Strength: Provides an exceptionally strong, permanent hold that resists shear, peel, and impact forces — ideal for heavy panel applications
• 💧 Waterproof & Moisture-Proof: Fully cured adhesive is water-resistant, making it perfect for bathrooms, wet rooms, kitchens, and high-humidity spaces
• ⚡ Fast Initial Grab: Begins bonding within minutes of application, reducing the need for additional supports or fixtures during installation
• 🌡️ Temperature Stable: Maintains its bond integrity across a wide temperature range, preventing panels from shifting or delaminating over time
• 🛠️ Easy to Apply: Compatible with standard caulk guns; smooth, non-drip formula ensures clean, mess-free application even on vertical surfaces
• ♻️ Low-VOC Formula: Safer for indoor environments with minimal odor during and after application

Ideal Use Cases

• PVC Marble Wall Panels (4×8 ft, glue-on installation)
• WPC Fluted 3D Wall Panels
• Composite Tile and Backsplash panels
• Bathroom, shower, and wet room wall installations
• Kitchen backsplash and accent walls
• Commercial interiors: restaurants, spas, retail spaces
• Repairs and replacements of existing panel sections

Installation Guide

1. Prepare the Surface: Ensure the wall is clean, dry, and free of dust, grease, or loose paint. Sand glossy surfaces lightly for better adhesion.
2. Cut the Nozzle: Trim the tube nozzle at a 45° angle to the desired bead size (typically ¼ inch).
3. Apply Adhesive: Run a continuous bead around the perimeter of the panel and add S-pattern or dot applications across the center field — approximately every 12 inches.
4. Position the Panel: Press the panel firmly against the wall and apply even pressure for 30–60 seconds. For large panels, use temporary support or panel clips while the adhesive sets.
5. Allow to Cure: Avoid disturbing the panel for at least 24 hours. Full structural strength is achieved after 48 hours.
6. Clean Up: Remove excess adhesive with a damp cloth before it cures. Cured adhesive can be removed with a utility knife.

Why Pair Power Grab Bond with NewGen Depot Panels?

Power Grab Bond is specifically tested and optimized for use with NewGen Depot's full range of PVC Marble Wall Panels and WPC Fluted 3D Panels. Using a panel-matched adhesive ensures maximum bond compatibility, prevents delamination, and protects your warranty. For professional results on high-value wall installations, this is the adhesive contractors trust.

Sold per tube. Quantity discounts available for contractors and wholesale buyers — contact us for pricing.