Power Grab Bond

Product characteristics

• One-component, neutral, room temperature curing. with good adhesion, generally No primer is required. After curing, most building materials, such as glass, aluminum, steel and stone Good adhesion can be produced on surfaces such as wood.
• After curing, the product forms a cold resistant, heat resistant and non-corrosive elastomer. With ozone resistance Ultra-strong weather resistance such as UV resistance.
• It has good compatibility with other silicone adhesives produced by the company.
  

Main purpose

• PVC marble wall panels adhesive
• All kinds of indoor decoration joint sealing.
  

Construction Summary

• 1. It is not applicable to all surfaces that exude grease, plasticizer or solvent
• It should not be used in a closed space or on the surface that is in direct contact with food or drinking water.
• The surface temperature of the base material is lower than 4 °C or more than 40 °C.

Materials containing copper or copper alloy should not be bonded.

Safety instructions

• Both uncured structural adhesive and structural adhesive will release volatile compounds during curing Long-term inhalation of high concentration volatile compounds will harm health, therefore The workplace should pay special attention to maintaining good ventilation.
• Avoid contact with eyes before curing. If contact with eyes, please use large Measure water and wash, then ask a doctor to check.
• This product will not release harmful substances or cause damage to the skin after complete curing Harmful effects.
• Before using this product, users should first check the compatibility and adhesion of contact materials The construction operation can only be carried out after the test is confirmed to be qualified
  

Storage period
Keep the original sealed state and keep the relative humidity below 50%. Temperature 5-27 Store below "C. The storage period is 12 months. This product can be transported as non-dangerous goods.